release: prepare release (#340)

diff --git a/boot/main/boot.py b/boot/main/boot.py
index 831f34d..746e9e2 100755
--- a/boot/main/boot.py
+++ b/boot/main/boot.py
@@ -1,64 +1,64 @@
-# boot.py -- run on boot-up
-# can run arbitrary Python, but best to keep it minimal
-import pyb, os, micropython, time
-import sys
-
-# Clean sys.path from qspi
-# Shouldn't happen in production, but just in case.
-for p in sys.path:
-    if "qspi" in sys.path:
-        sys.path.remove(p)
-
-# power hold
-pwr = pyb.Pin("B15", pyb.Pin.OUT)
-pwr.on()
-
-version = "<version:tag10>0100900099</version:tag10>"
-
-# get i2c
-i2c = pyb.I2C(1)
-i2c.init()
-# start measurements
-if 112 in i2c.scan():
-    i2c.mem_write(0b00010000, 112, 0)
-
-leds = [pyb.LED(i) for i in range(1,5)]
-# poweroff on button press
-def pwrcb(e):
-    micropython.schedule(poweroff, 0)
-
-# callback scheduled from the interrupt
-def poweroff(_):
-    # make sure it disables power no matter what
-    try:
-        for led in leds:
-            led.toggle()
-        # stop battery manangement
-        if 112 in i2c.scan():
-            i2c.mem_write(0, 112, 0)
-        # sync filesystem
-        os.sync()
-        time.sleep_ms(300)
-    finally:
-        # disable power
-        pwr.off()
-    time.sleep_ms(300)
-    # will never reach here
-    for led in leds:
-        led.toggle()
-
-pyb.ExtInt(pyb.Pin('B1'), pyb.ExtInt.IRQ_FALLING, pyb.Pin.PULL_NONE, pwrcb)
-
-# configure usb from start if you want, 
-# otherwise will be configured after PIN
-# pyb.usb_mode("VCP+MSC") # debug mode with USB and mounted storages from start
-# pyb.usb_mode("VCP") # debug mode with USB from start
-# disable at start
-pyb.usb_mode(None)
-os.dupterm(None,0)
-os.dupterm(None,1)
-
-# inject version and i2c to platform module
+# boot.py -- run on boot-up
+# can run arbitrary Python, but best to keep it minimal
+import pyb, os, micropython, time
+import sys
+
+# Clean sys.path from qspi
+# Shouldn't happen in production, but just in case.
+for p in sys.path:
+    if "qspi" in sys.path:
+        sys.path.remove(p)
+
+# power hold
+pwr = pyb.Pin("B15", pyb.Pin.OUT)
+pwr.on()
+
+version = "<version:tag10>0101000099</version:tag10>"
+
+# get i2c
+i2c = pyb.I2C(1)
+i2c.init()
+# start measurements
+if 112 in i2c.scan():
+    i2c.mem_write(0b00010000, 112, 0)
+
+leds = [pyb.LED(i) for i in range(1,5)]
+# poweroff on button press
+def pwrcb(e):
+    micropython.schedule(poweroff, 0)
+
+# callback scheduled from the interrupt
+def poweroff(_):
+    # make sure it disables power no matter what
+    try:
+        for led in leds:
+            led.toggle()
+        # stop battery manangement
+        if 112 in i2c.scan():
+            i2c.mem_write(0, 112, 0)
+        # sync filesystem
+        os.sync()
+        time.sleep_ms(300)
+    finally:
+        # disable power
+        pwr.off()
+    time.sleep_ms(300)
+    # will never reach here
+    for led in leds:
+        led.toggle()
+
+pyb.ExtInt(pyb.Pin('B1'), pyb.ExtInt.IRQ_FALLING, pyb.Pin.PULL_NONE, pwrcb)
+
+# configure usb from start if you want, 
+# otherwise will be configured after PIN
+# pyb.usb_mode("VCP+MSC") # debug mode with USB and mounted storages from start
+# pyb.usb_mode("VCP") # debug mode with USB from start
+# disable at start
+pyb.usb_mode(None)
+os.dupterm(None,0)
+os.dupterm(None,1)
+
+# inject version and i2c to platform module
 import platform
 platform.version = version
 platform.i2c = i2c