← Watch feed
cmake, translation: Skip source locations in TS files
Public commit record
73/100 · Adequate
What the developer wrote
Authored by Hennadii Stepanov
cmake, translation: Skip source locations in TS files
Source locations do not contribute to the string's Context on Transifex
(used for hash calculation) and only trigger unnecessary diffs in
version control.
While the `filename` attribute of the `<location>` element is rendered
as "Occurrences" on Transifex, Qt's lupdate tool does not seem to set
this attribute consistently.
✓ Specific, descriptive subject✓ Names a concrete action or component✓ Provides detailed explanatory context
What changed, and why it matters
This commit changes how Bitcoin Core's translation files are generated. It removes source-code file references (line numbers and filenames) from the translation catalog to reduce unnecessary version-control noise. There is no security-relevant change to the running software, wallets, network, or consensus code.
Recommended action
No security action required. This is a routine translation workflow cleanup.
Security signals we found
No strong security signals were identified.
Evidence from the diff
The commit updates share/qt/translate.cmake to pass -locations none instead of -locations relative to Qt’s lupdate tool. As a result, generated .ts files no longer contain
Changed components
share/qt/translate.cmakesrc/qt/locale/bitcoin_en.tsInspect captured patch +1 / −1366
diff --git a/share/qt/translate.cmake b/share/qt/translate.cmake
index 8f1da84e..6d5b7b76 100644
--- a/share/qt/translate.cmake
+++ b/share/qt/translate.cmake
@@ -103,7 +103,7 @@ execute_process(
COMMAND ${LUPDATE_EXECUTABLE}
-no-obsolete
-I ${PROJECT_SOURCE_DIR}/src
- -locations relative
+ -locations none
${ui_files}
${qt_translatable_sources}
${PROJECT_SOURCE_DIR}/src/qt/bitcoinstrings.cpp
diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts
index ba3d54bf..e1ccd172 100644
--- a/src/qt/locale/bitcoin_en.ts
+++ b/src/qt/locale/bitcoin_en.ts
@@ -4,131 +4,105 @@
<context>
<name>AddressBookPage</name>
<message>
- <location filename="../forms/addressbookpage.ui" line="+37"/>
<source>Right-click to edit address or label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+27"/>
<source>Create a new address</source>
<translation>Create a new address</translation>
</message>
<message>
- <location line="+3"/>
<source>&New</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>&Copy</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+67"/>
<source>C&lose</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-53"/>
<source>Delete the currently selected address from the list</source>
<translation>Delete the currently selected address from the list</translation>
</message>
<message>
- <location line="-71"/>
<source>Enter address or label to search</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+54"/>
<source>Copy the currently selected address to the clipboard</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+47"/>
<source>Export the data in the current tab to a file</source>
<translation>Export the data in the current tab to a file</translation>
</message>
<message>
- <location line="+3"/>
<source>&Export</source>
<translation>&Export</translation>
</message>
<message>
- <location line="-30"/>
- <location filename="../addressbookpage.cpp" line="+105"/>
<source>&Delete</source>
<translation>&Delete</translation>
</message>
<message>
- <location filename="../addressbookpage.cpp" line="-30"/>
<source>Choose the address to send coins to</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Choose the address to receive coins with</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>C&hoose</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses.
Signing is only possible with addresses of the type 'legacy'.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>&Copy Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &Label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>&Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+165"/>
<source>Export Address List</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Comma separated file</source>
<extracomment>Expanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>There was an error trying to save the address list to %1. Please try again.</source>
<extracomment>An error message. %1 is a stand-in argument for the name of the file we attempted to save to.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Sending addresses - %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Receiving addresses - %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-36"/>
<source>Exporting Failed</source>
<translation type="unfinished"></translation>
</message>
@@ -136,17 +110,14 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>AddressTableModel</name>
<message>
- <location filename="../addresstablemodel.cpp" line="+167"/>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+38"/>
<source>(no label)</source>
<translation type="unfinished"></translation>
</message>
@@ -154,172 +125,130 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>AskPassphraseDialog</name>
<message>
- <location filename="../forms/askpassphrasedialog.ui" line="+26"/>
<source>Passphrase Dialog</source>
<translation>Passphrase Dialog</translation>
</message>
<message>
- <location line="+30"/>
<source>Enter passphrase</source>
<translation>Enter passphrase</translation>
</message>
<message>
- <location line="+14"/>
<source>New passphrase</source>
<translation>New passphrase</translation>
</message>
<message>
- <location line="+14"/>
<source>Repeat new passphrase</source>
<translation>Repeat new passphrase</translation>
</message>
<message>
- <location line="+14"/>
<source>Show passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../askpassphrasedialog.cpp" line="+45"/>
<source>Encrypt wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>This operation needs your wallet passphrase to unlock the wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Unlock wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Change passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+48"/>
<source>Confirm wallet encryption</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
- <location line="+18"/>
<source>Are you sure you wish to encrypt your wallet?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
- <location line="+58"/>
<source>Wallet encrypted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-152"/>
<source>Enter the new passphrase for the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Enter the old passphrase and new passphrase for the wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+50"/>
<source>Continue</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Back</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Wallet to be encrypted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Your wallet is about to be encrypted. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+15"/>
<source>Your wallet is now encrypted. </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
- <location line="+8"/>
- <location line="+62"/>
<source>Wallet encryption failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-69"/>
<source>Wallet encryption failed due to an internal error. Your wallet was not encrypted.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
- <location line="+62"/>
<source>The supplied passphrases do not match.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-53"/>
- <location line="+3"/>
- <location line="+15"/>
<source>Wallet unlock failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-17"/>
- <location line="+38"/>
<source>The passphrase entered for the wallet decryption was incorrect.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-35"/>
<source>The passphrase entered for the wallet decryption is incorrect. It contains a null character (ie - a zero byte). If the passphrase was set with a version of this software prior to 25.0, please try again with only the characters up to — but not including — the first null character. If this is successful, please set a new passphrase to avoid this issue in the future.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+27"/>
<source>Wallet passphrase was successfully changed.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
- <location line="+3"/>
<source>Passphrase change failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>The old passphrase entered for the wallet decryption is incorrect. It contains a null character (ie - a zero byte). If the passphrase was set with a version of this software prior to 25.0, please try again with only the characters up to — but not including — the first null character.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+46"/>
- <location line="+33"/>
<source>Warning: The Caps Lock key is on!</source>
<translation type="unfinished"></translation>
</message>
@@ -327,12 +256,10 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>BanTableModel</name>
<message>
- <location filename="../bantablemodel.cpp" line="+85"/>
<source>IP/Netmask</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Banned Until</source>
<translation type="unfinished"></translation>
</message>
@@ -340,27 +267,22 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>BitcoinApplication</name>
<message>
- <location filename="../bitcoin.cpp" line="+251"/>
<source>Settings file %1 might be corrupt or invalid.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+185"/>
<source>Runaway exception</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>A fatal error occurred. %1 can no longer continue safely and will quit.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Internal error</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>An internal error occurred. %1 will attempt to continue safely. This is an unexpected bug which can be reported as described below.</source>
<translation type="unfinished"></translation>
</message>
@@ -368,253 +290,203 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>BitcoinGUI</name>
<message>
- <location filename="../bitcoingui.cpp" line="+258"/>
<source>&Overview</source>
<translation>&Overview</translation>
</message>
<message>
- <location line="+1"/>
<source>Show general overview of wallet</source>
<translation>Show general overview of wallet</translation>
</message>
<message>
- <location line="+20"/>
<source>&Transactions</source>
<translation>&Transactions</translation>
</message>
<message>
- <location line="+1"/>
<source>Browse transaction history</source>
<translation>Browse transaction history</translation>
</message>
<message>
- <location line="+19"/>
<source>E&xit</source>
<translation>E&xit</translation>
</message>
<message>
- <location line="+1"/>
<source>Quit application</source>
<translation>Quit application</translation>
</message>
<message>
- <location line="+3"/>
<source>&About %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Show information about %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>About &Qt</source>
<translation>About &Qt</translation>
</message>
<message>
- <location line="+1"/>
<source>Show information about Qt</source>
<translation>Show information about Qt</translation>
</message>
<message>
- <location line="+3"/>
<source>Modify configuration options for %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+44"/>
<source>Create a new wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+218"/>
<source>&Minimize</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+79"/>
<source>Wallet:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+418"/>
<source>Network activity disabled.</source>
<extracomment>A substring of the tooltip.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+446"/>
<source>Proxy is <b>enabled</b>: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-1250"/>
<source>Send coins to a Bitcoin address</source>
<translation>Send coins to a Bitcoin address</translation>
</message>
<message>
- <location line="+53"/>
<source>Backup wallet to another location</source>
<translation>Backup wallet to another location</translation>
</message>
<message>
- <location line="+2"/>
<source>Change the passphrase used for wallet encryption</source>
<translation>Change the passphrase used for wallet encryption</translation>
</message>
<message>
- <location line="-56"/>
<source>&Send</source>
<translation>&Send</translation>
</message>
<message>
- <location line="+7"/>
<source>&Receive</source>
<translation>&Receive</translation>
</message>
<message>
- <location line="+38"/>
<source>&Options…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>&Encrypt Wallet…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Encrypt the private keys that belong to your wallet</source>
<translation>Encrypt the private keys that belong to your wallet</translation>
</message>
<message>
- <location line="+2"/>
<source>&Backup Wallet…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>&Change Passphrase…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Sign &message…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Sign messages with your Bitcoin addresses to prove you own them</source>
<translation>Sign messages with your Bitcoin addresses to prove you own them</translation>
</message>
<message>
- <location line="+1"/>
<source>&Verify message…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Verify messages to ensure they were signed with specified Bitcoin addresses</source>
<translation>Verify messages to ensure they were signed with specified Bitcoin addresses</translation>
</message>
<message>
- <location line="+1"/>
<source>&Load PSBT from file…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Open &URI…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Close Wallet…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Create Wallet…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Close All Wallets…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+136"/>
<source>Restore and Migrate Wallet File…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+40"/>
<source>&File</source>
<translation>&File</translation>
</message>
<message>
- <location line="+21"/>
<source>&Settings</source>
<translation>&Settings</translation>
</message>
<message>
- <location line="+61"/>
<source>&Help</source>
<translation>&Help</translation>
</message>
<message>
- <location line="+11"/>
<source>Tabs toolbar</source>
<translation>Tabs toolbar</translation>
</message>
<message>
- <location line="+482"/>
<source>Syncing Headers (%1%)…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+58"/>
<source>Synchronizing with network…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Indexing blocks on disk…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Processing blocks on disk…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Connecting to peers…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-913"/>
<source>Request payments (generates QR codes and bitcoin: URIs)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+65"/>
<source>Show the list of used sending addresses and labels</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Show the list of used receiving addresses and labels</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+31"/>
<source>&Command-line options</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+824"/>
<source>Processed %n block(s) of transaction history.</source>
<translation>
<numerusform>Processed %n block of transaction history.</numerusform>
@@ -622,237 +494,189 @@ Signing is only possible with addresses of the type 'legacy'.</source>
</translation>
</message>
<message>
- <location line="+23"/>
<source>%1 behind</source>
<translation>%1 behind</translation>
</message>
<message>
- <location line="+5"/>
<source>Catching up…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Last received block was generated %1 ago.</source>
<translation>Last received block was generated %1 ago.</translation>
</message>
<message>
- <location line="+2"/>
<source>Transactions after this will not yet be visible.</source>
<translation>Transactions after this will not yet be visible.</translation>
</message>
<message>
- <location line="+35"/>
<source>Error</source>
<translation>Error</translation>
</message>
<message>
- <location line="+4"/>
<source>Warning</source>
<translation>Warning</translation>
</message>
<message>
- <location line="+4"/>
<source>Information</source>
<translation>Information</translation>
</message>
<message>
- <location line="-88"/>
<source>Up to date</source>
<translation>Up to date</translation>
</message>
<message>
- <location line="-898"/>
<source>Ctrl+Q</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>Load Partially Signed Bitcoin Transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Load PSBT from &clipboard…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Load Partially Signed Bitcoin Transaction from clipboard</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Node window</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Open node debugging and diagnostic console</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>&Sending addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>&Receiving addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Open a bitcoin: URI</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Open Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Open a wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Close wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Restore Wallet…</source>
<extracomment>Name of the menu item that restores wallet from a backup file.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Restore a wallet from a backup file</source>
<extracomment>Status tip for Restore Wallet menu item</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Close all wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Migrate Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Migrate a wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Show the %1 help message to get a list with possible Bitcoin command-line options</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>&Mask values</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Mask the values in the Overview tab</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+55"/>
- <location line="+63"/>
<source>No wallets available</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-57"/>
- <location line="+65"/>
<source>Wallet Data</source>
<extracomment>Name of the wallet data file format.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-62"/>
<source>Load Wallet Backup</source>
<extracomment>The title for Restore Wallet File Windows</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Restore Wallet</source>
<extracomment>Title of pop-up window shown when the user is attempting to restore a wallet.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
- <location line="+63"/>
<source>Wallet Name</source>
<extracomment>Label of the input field where the name of the wallet is entered.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-59"/>
<source>Invalid Wallet Name</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Wallet name cannot be empty</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+49"/>
<source>Restore and Migrate Wallet Backup</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Restore and Migrate Wallet</source>
<extracomment>Title of pop-up window shown when the user is attempting to restore a wallet.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+59"/>
<source>&Window</source>
<translation type="unfinished">&Window</translation>
</message>
<message>
- <location line="+3"/>
<source>Ctrl+M</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Zoom</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+18"/>
<source>Main Window</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+279"/>
<source>%1 client</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+68"/>
<source>&Hide</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>S&how</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+118"/>
<source>%n active connection(s) to Bitcoin network.</source>
<extracomment>A substring of the tooltip.</extracomment>
<translation type="unfinished">
@@ -861,117 +685,96 @@ Signing is only possible with addresses of the type 'legacy'.</source>
</translation>
</message>
<message>
- <location line="+10"/>
<source>Click for more actions.</source>
<extracomment>A substring of the tooltip. "More actions" are available via the context menu.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>Show Peers tab</source>
<extracomment>A context menu item. The "Peers tab" is an element of the "Node window".</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Disable network activity</source>
<extracomment>A context menu item.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Enable network activity</source>
<extracomment>A context menu item. The network activity was disabled previously.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>Pre-syncing Headers (%1%)…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+159"/>
<source>Error: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Warning: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+108"/>
<source>Date: %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Amount: %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Wallet: %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Type: %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Label: %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Address: %1
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Sent transaction</source>
<translation>Sent transaction</translation>
</message>
<message>
- <location line="+0"/>
<source>Incoming transaction</source>
<translation>Incoming transaction</translation>
</message>
<message>
- <location line="+52"/>
<source>HD key generation is <b>enabled</b></source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>HD key generation is <b>disabled</b></source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Private key <b>disabled</b></source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Wallet is <b>encrypted</b> and currently <b>unlocked</b></source>
<translation>Wallet is <b>encrypted</b> and currently <b>unlocked</b></translation>
</message>
<message>
- <location line="+8"/>
<source>Wallet is <b>encrypted</b> and currently <b>locked</b></source>
<translation>Wallet is <b>encrypted</b> and currently <b>locked</b></translation>
</message>
<message>
- <location line="+119"/>
<source>Original message:</source>
<translation type="unfinished"></translation>
</message>
@@ -979,168 +782,134 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>CoinControlDialog</name>
<message>
- <location filename="../forms/coincontroldialog.ui" line="+14"/>
<source>Coin Selection</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+37"/>
<source>Quantity:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+29"/>
<source>Bytes:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+45"/>
<source>Amount:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+45"/>
<source>Fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+48"/>
<source>After Fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Change:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+56"/>
<source>(un)select all</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Tree mode</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>List mode</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+56"/>
<source>Amount</source>
<translation type="unfinished">Amount</translation>
</message>
<message>
- <location line="+5"/>
<source>Received with label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Received with address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Date</source>
<translation type="unfinished">Date</translation>
</message>
<message>
- <location line="+5"/>
<source>Confirmations</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Confirmed</source>
<translation type="unfinished">Confirmed</translation>
</message>
<message>
- <location filename="../coincontroldialog.cpp" line="+65"/>
<source>Copy amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-11"/>
<source>&Copy address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy transaction &ID and output index</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>L&ock unspent</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>&Unlock unspent</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Copy quantity</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Copy fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy after fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy change</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+294"/>
<source>(%1 locked)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+165"/>
<source>Can vary +/- %1 satoshi(s) per input.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+45"/>
- <location line="+54"/>
<source>(no label)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-7"/>
<source>change from %1 (%2)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>(change)</source>
<translation type="unfinished"></translation>
</message>
@@ -1148,34 +917,28 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>CreateWalletActivity</name>
<message>
- <location filename="../walletcontroller.cpp" line="+250"/>
<source>Create Wallet</source>
<extracomment>Title of window indicating the progress of creation of a new wallet.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Creating Wallet <b>%1</b>…</source>
<extracomment>Descriptive text of the create wallet progress window which indicates to the user which wallet is currently being created.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Create wallet failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Create wallet warning</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Can't list signers</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Too many external signers found</source>
<translation type="unfinished"></translation>
</message>
@@ -1183,82 +946,66 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>CreateWalletDialog</name>
<message>
- <location filename="../forms/createwalletdialog.ui" line="+14"/>
<source>Create Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+15"/>
<source>You are one step away from creating your new wallet!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Please provide a name and, if desired, enable any advanced options</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+25"/>
<source>Wallet Name</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Encrypt the wallet. The wallet will be encrypted with a passphrase of your choice.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Encrypt Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>Advanced Options</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>Disable private keys for this wallet. Wallets with private keys disabled will have no private keys and cannot have an HD seed or imported private keys. This is ideal for watch-only wallets.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Disable Private Keys</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Make a blank wallet. Blank wallets do not initially have private keys or scripts. Private keys and addresses can be imported using descriptors at a later time.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Make Blank Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Use an external signing device such as a hardware wallet. Configure the external signer script in wallet preferences first.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>External signer</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../createwalletdialog.cpp" line="+20"/>
<source>Create</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+68"/>
<source>Compiled without external signing support (required for external signing)</source>
<extracomment>"External signing" means using devices such as hardware wallets.</extracomment>
<translation type="unfinished"></translation>
@@ -1267,67 +1014,54 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>EditAddressDialog</name>
<message>
- <location filename="../forms/editaddressdialog.ui" line="+14"/>
<source>Edit Address</source>
<translation>Edit Address</translation>
</message>
<message>
- <location line="+11"/>
<source>&Label</source>
<translation>&Label</translation>
</message>
<message>
- <location line="+10"/>
<source>The label associated with this address list entry</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>The address associated with this address list entry. This can only be modified for sending addresses.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-10"/>
<source>&Address</source>
<translation>&Address</translation>
</message>
<message>
- <location filename="../editaddressdialog.cpp" line="+29"/>
<source>New sending address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Edit receiving address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Edit sending address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+77"/>
<source>The entered address "%1" is not a valid Bitcoin address.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+33"/>
<source>Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>The entered address "%1" is already in the address book with label "%2".</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-28"/>
<source>Could not unlock wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>New key generation failed.</source>
<translation type="unfinished"></translation>
</message>
@@ -1335,27 +1069,22 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>FreespaceChecker</name>
<message>
- <location filename="../freespacechecker.cpp" line="+21"/>
<source>A new data directory will be created.</source>
<translation>A new data directory will be created.</translation>
</message>
<message>
- <location line="+22"/>
<source>name</source>
<translation>name</translation>
</message>
<message>
- <location line="+2"/>
<source>Directory already exists. Add %1 if you intend to create a new directory here.</source>
<translation>Directory already exists. Add %1 if you intend to create a new directory here.</translation>
</message>
<message>
- <location line="+3"/>
<source>Path already exists, and is not a directory.</source>
<translation>Path already exists, and is not a directory.</translation>
</message>
<message>
- <location line="+7"/>
<source>Cannot create data directory here.</source>
<translation>Cannot create data directory here.</translation>
</message>
@@ -1363,17 +1092,14 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>HelpMessageDialog</name>
<message>
- <location filename="../utilitydialog.cpp" line="+36"/>
<source>version</source>
<translation type="unfinished">version</translation>
</message>
<message>
- <location line="+4"/>
<source>About %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+18"/>
<source>Command-line options</source>
<translation type="unfinished"></translation>
</message>
@@ -1381,67 +1107,54 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>Intro</name>
<message>
- <location filename="../forms/intro.ui" line="+14"/>
<source>Welcome</source>
<translation>Welcome</translation>
</message>
<message>
- <location line="+9"/>
<source>Welcome to %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>As this is the first time the program is launched, you can choose where %1 will store its data.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+189"/>
<source>Limit block chain storage to</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Reverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source> GB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-32"/>
<source>This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-10"/>
<source>When you click OK, %1 will begin to download and process the full %4 block chain (%2 GB) starting with the earliest transactions in %3 when %4 initially launched.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+20"/>
<source>If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-160"/>
<source>Use the default data directory</source>
<translation>Use the default data directory</translation>
</message>
<message>
- <location line="+7"/>
<source>Use a custom data directory:</source>
<translation>Use a custom data directory:</translation>
</message>
<message>
- <location filename="../intro.cpp" line="+54"/>
<source>Bitcoin</source>
<translation type="unfinished">Bitcoin</translation>
</message>
<message numerus="yes">
- <location line="+164"/>
<source>%n GB of space available</source>
<translation type="unfinished">
<numerusform>%n GB of space available</numerusform>
@@ -1449,7 +1162,6 @@ Signing is only possible with addresses of the type 'legacy'.</source>
</translation>
</message>
<message numerus="yes">
- <location line="+2"/>
<source>(of %n GB needed)</source>
<translation type="unfinished">
<numerusform>(of %n GB needed)</numerusform>
@@ -1457,7 +1169,6 @@ Signing is only possible with addresses of the type 'legacy'.</source>
</translation>
</message>
<message numerus="yes">
- <location line="+3"/>
<source>(%n GB needed for full chain)</source>
<translation type="unfinished">
<numerusform>(%n GB needed for full chain)</numerusform>
@@ -1465,22 +1176,18 @@ Signing is only possible with addresses of the type 'legacy'.</source>
</translation>
</message>
<message>
- <location line="+17"/>
<source>Choose data directory</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+55"/>
<source>At least %1 GB of data will be stored in this directory, and it will grow over time.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Approximately %1 GB of data will be stored in this directory.</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+9"/>
<source>(sufficient to restore backups %n day(s) old)</source>
<extracomment>Explanatory text on the capability of the current prune target.</extracomment>
<translation type="unfinished">
@@ -1489,22 +1196,18 @@ Signing is only possible with addresses of the type 'legacy'.</source>
</translation>
</message>
<message>
- <location line="+2"/>
<source>%1 will download and store a copy of the Bitcoin block chain.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>The wallet will also be stored in this directory.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-144"/>
<source>Error: Specified data directory "%1" cannot be created.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>Error</source>
<translation>Error</translation>
</message>
@@ -1512,13 +1215,11 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>LoadWalletsActivity</name>
<message>
- <location filename="../walletcontroller.cpp" line="+74"/>
<source>Load Wallets</source>
<extracomment>Title of progress window which is displayed when wallets are being loaded.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Loading wallets…</source>
<extracomment>Descriptive text of the load wallets progress window which indicates to the user that wallets are currently being loaded.</extracomment>
<translation type="unfinished"></translation>
@@ -1527,17 +1228,14 @@ Signing is only possible with addresses of the type 'legacy'.</source>
<context>
<name>MigrateWalletActivity</name>
<message>
- <location line="+94"/>
<source>Migrate wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Are you sure you wish to migrate the wallet <i>%1</i>?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Migrating the wallet will convert this wallet to one or more descriptor wallets. A new wallet backup will need to be made.
If this wallet contains any watchonly scripts, a new wallet will be created which contains those watchonly scripts.
If this wallet contains any solvable but not watched scripts, a different and new wallet will be created which contains those scripts.
@@ -1546,42 +1244,34 @@ The migration process will create a backup of the wallet before migrating. This
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-28"/>
<source>Migrate Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Migrating Wallet <b>%1</b>…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>The wallet '%1' was migrated successfully.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Watchonly scripts have been migrated to a new wallet named '%1'.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Solvable but not watched scripts have been migrated to a new wallet named '%1'.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+34"/>
<source>Restore and Migrate wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Are you sure you wish to restore the wallet file <i>%1</i> to <i>%2</i> and migrate it?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Restoring the wallet will copy the backup file to the wallets directory and place it in the standard wallet directory layout. The original file will not be modified.
Migrating the wallet will convert the restored wallet to one or more descriptor wallets. A new wallet backup will need to be made.
@@ -1592,24 +1282,20 @@ The migration process will create a backup of the wallet before migrating. This
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+14"/>
<source>Restore Wallet</source>
<extracomment>Title of progress window which is displayed when wallets are being restored.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Restoring Wallet <b>%1</b>…</source>
<extracomment>Descriptive text of the restore wallets progress window which indicates to the user that wallets are currently being restored.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Migration failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Migration Successful</source>
<translation type="unfinished"></translation>
</message>
@@ -1617,80 +1303,62 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>ModalOverlay</name>
<message>
- <location filename="../forms/modaloverlay.ui" line="+14"/>
<source>Form</source>
<translation type="unfinished">Form</translation>
</message>
<message>
- <location line="+119"/>
<source>Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+63"/>
<source>Number of blocks left</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
- <location line="+26"/>
- <location filename="../modaloverlay.cpp" line="+160"/>
<source>Unknown…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+44"/>
- <location line="+20"/>
<source>calculating…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-77"/>
<source>Last block time</source>
<translation type="unfinished">Last block time</translation>
</message>
<message>
- <location line="+26"/>
<source>Progress</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+24"/>
<source>Progress increase per hour</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+20"/>
<source>Estimated time left until synced</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+37"/>
<source>Hide</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Esc</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../modaloverlay.cpp" line="-126"/>
<source>%1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+132"/>
<source>Unknown. Syncing Headers (%1, %2%)…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Unknown. Pre-syncing Headers (%1, %2%)…</source>
<translation type="unfinished"></translation>
</message>
@@ -1698,17 +1366,14 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>OpenURIDialog</name>
<message>
- <location filename="../forms/openuridialog.ui" line="+14"/>
<source>Open bitcoin URI</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>URI:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+14"/>
<source>Paste address from clipboard</source>
<extracomment>Tooltip text for button that allows you to paste an address that is in your clipboard.</extracomment>
<translation type="unfinished">Paste address from clipboard</translation>
@@ -1717,23 +1382,19 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>OpenWalletActivity</name>
<message>
- <location filename="../walletcontroller.cpp" line="-199"/>
<source>Open wallet failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Open wallet warning</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+14"/>
<source>Open Wallet</source>
<extracomment>Title of window indicating the progress of opening of a wallet.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Opening Wallet <b>%1</b>…</source>
<extracomment>Descriptive text of the open wallet progress window which indicates to the user which wallet is currently being opened.</extracomment>
<translation type="unfinished"></translation>
@@ -1742,445 +1403,353 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>OptionsDialog</name>
<message>
- <location filename="../forms/optionsdialog.ui" line="+14"/>
<source>Options</source>
<translation>Options</translation>
</message>
<message>
- <location line="+13"/>
<source>&Main</source>
<translation>&Main</translation>
</message>
<message>
- <location line="+6"/>
<source>Automatically start %1 after logging in to the system.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>&Start %1 on system login</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+22"/>
<source>Enabling pruning significantly reduces the disk space required to store transactions. All blocks are still fully validated. Reverting this setting requires re-downloading the entire blockchain.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+50"/>
<source>Maximum database cache size. Make sure you have enough RAM. A larger cache can contribute to faster sync, after which the benefit is less pronounced for most use cases. Lowering the cache size will reduce memory usage. Unused mempool memory is shared for this cache.</source>
<extracomment>Tooltip text for Options window setting that sets the size of the database cache. Explains the corresponding effects of increasing/decreasing this value.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Size of &database cache</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+46"/>
<source>Number of script &verification threads</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+132"/>
<source>Full path to a %1 compatible script (e.g. C:\Downloads\hwi.exe or /Users/you/Downloads/hwi.py). Beware: malware can steal your coins!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Automatically open the Bitcoin client port on the router. This only works when your router supports PCP or NAT-PMP and it is enabled. The external port could be random.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Map port using PCP or NA&T-PMP</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+54"/>
- <location line="+187"/>
<source>IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-118"/>
- <location line="+23"/>
- <location line="+23"/>
<source>Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+169"/>
<source>Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+107"/>
<source>Font in the Overview tab: </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+45"/>
<source>Options set in this dialog are overridden by the command line:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+45"/>
<source>Open the %1 configuration file from the working directory.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Open Configuration File</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Reset all client options to default.</source>
<translation>Reset all client options to default.</translation>
</message>
<message>
- <location line="+3"/>
<source>&Reset Options</source>
<translation>&Reset Options</translation>
</message>
<message>
- <location line="-560"/>
<source>&Network</source>
<translation>&Network</translation>
</message>
<message>
- <location line="-254"/>
<source>Prune &block storage to</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>GB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+25"/>
<source>Reverting this setting requires re-downloading the entire blockchain.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+31"/>
<source>MiB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+27"/>
<source>Set the number of script verification threads. Negative values correspond to the number of cores you want to leave free to the system.</source>
<extracomment>Tooltip text for Options window setting that sets the number of script verification threads. Explains that negative values mean to leave these many cores free to the system.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>(0 = auto, <0 = leave that many cores free)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+22"/>
<source>This allows you or a third party tool to communicate with the node through command-line and JSON-RPC commands.</source>
<extracomment>Tooltip text for Options window setting that enables the RPC server.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Enable R&PC server</source>
<extracomment>An Options window setting to enable the RPC server.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>W&allet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Whether to set subtract fee from amount as default or not.</source>
<extracomment>Tooltip text for Options window setting that sets subtracting the fee from a sending amount as default.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Subtract &fee from amount by default</source>
<extracomment>An Options window setting to set subtracting the fee from a sending amount as default.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Expert</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Enable coin &control features</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>&Spend unconfirmed change</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Enable &PSBT controls</source>
<extracomment>An options window setting to enable PSBT controls.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Whether to show PSBT controls.</source>
<extracomment>Tooltip text for options window setting that enables PSBT controls.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>External Signer (e.g. hardware wallet)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>&External signer script path</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+52"/>
<source>Accept connections from outside.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Allow incomin&g connections</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Connect to the Bitcoin network through a SOCKS5 proxy.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>&Connect through SOCKS5 proxy (default proxy):</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
- <location line="+187"/>
<source>Proxy &IP:</source>
<translation>Proxy &IP:</translation>
</message>
<message>
- <location line="-155"/>
- <location line="+187"/>
<source>&Port:</source>
<translation>&Port:</translation>
</message>
<message>
- <location line="-162"/>
- <location line="+187"/>
<source>Port of the proxy (e.g. 9050)</source>
<translation>Port of the proxy (e.g. 9050)</translation>
</message>
<message>
- <location line="-163"/>
<source>Used for reaching peers via:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>IPv4</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>IPv6</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Tor</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+130"/>
<source>&Window</source>
<translation>&Window</translation>
</message>
<message>
- <location line="+6"/>
<source>Show the icon in the system tray.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>&Show tray icon</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Show only a tray icon after minimizing the window.</source>
<translation>Show only a tray icon after minimizing the window.</translation>
</message>
<message>
- <location line="+3"/>
<source>&Minimize to the tray instead of the taskbar</source>
<translation>&Minimize to the tray instead of the taskbar</translation>
</message>
<message>
- <location line="+10"/>
<source>M&inimize on close</source>
<translation>M&inimize on close</translation>
</message>
<message>
- <location line="+21"/>
<source>&Display</source>
<translation>&Display</translation>
</message>
<message>
- <location line="+8"/>
<source>User Interface &language:</source>
<translation>User Interface &language:</translation>
</message>
<message>
- <location line="+13"/>
<source>The user interface language can be set here. This setting will take effect after restarting %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>&Unit to show amounts in:</source>
<translation>&Unit to show amounts in:</translation>
</message>
<message>
- <location line="+13"/>
<source>Choose the default subdivision unit to show in the interface and when sending coins.</source>
<translation>Choose the default subdivision unit to show in the interface and when sending coins.</translation>
</message>
<message>
- <location line="+11"/>
- <location line="+13"/>
<source>Third-party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-10"/>
<source>&Third-party transaction URLs</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-507"/>
<source>Whether to show coin control features or not.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+290"/>
<source>Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Use separate SOCKS&5 proxy to reach peers via Tor onion services:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+424"/>
<source>&OK</source>
<translation>&OK</translation>
</message>
<message>
- <location line="+13"/>
<source>&Cancel</source>
<translation>&Cancel</translation>
</message>
<message>
- <location filename="../optionsdialog.cpp" line="+145"/>
<source>Compiled without external signing support (required for external signing)</source>
<extracomment>"External signing" means using devices such as hardware wallets.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>default</source>
<translation>default</translation>
</message>
<message>
- <location line="+77"/>
<source>none</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+108"/>
<source>Confirm options reset</source>
<extracomment>Window title text of pop-up window shown when the user has chosen to reset options.</extracomment>
<translation>Confirm options reset</translation>
</message>
<message>
- <location line="-9"/>
- <location line="+81"/>
<source>Client restart required to activate changes.</source>
<extracomment>Text explaining that the settings changed will not come into effect until the client is restarted.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-77"/>
<source>Current settings will be backed up at "%1".</source>
<extracomment>Text explaining to the user that the client's current settings will be backed up at a specific location. %1 is a stand-in argument for the backup location's path.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Client will be shut down. Do you want to proceed?</source>
<extracomment>Text asking the user to confirm if they would like to proceed with a client shutdown.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+20"/>
<source>Configuration options</source>
<extracomment>Window title text of pop-up box that allows opening up of configuration file.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file.</source>
<extracomment>Explanatory text about the priority order of instructions considered by client. The order from high to low being: command-line, configuration file, GUI settings.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Continue</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Error</source>
<translation type="unfinished">Error</translation>
</message>
<message>
- <location line="+0"/>
<source>The configuration file could not be opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+42"/>
<source>This change would require a client restart.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+28"/>
<source>The supplied proxy address is invalid.</source>
<translation>The supplied proxy address is invalid.</translation>
</message>
@@ -2188,7 +1757,6 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>OptionsModel</name>
<message>
- <location filename="../optionsmodel.cpp" line="+226"/>
<source>Could not read setting "%1", %2.</source>
<translation type="unfinished"></translation>
</message>
@@ -2196,68 +1764,54 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>OverviewPage</name>
<message>
- <location filename="../forms/overviewpage.ui" line="+14"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
- <location line="+62"/>
- <location line="+220"/>
<source>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</source>
<translation>The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.</translation>
</message>
<message>
- <location line="-88"/>
<source>Available:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Your current spendable balance</source>
<translation>Your current spendable balance</translation>
</message>
<message>
- <location line="+16"/>
<source>Pending:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-114"/>
<source>Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance</source>
<translation>Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance</translation>
</message>
<message>
- <location line="+62"/>
<source>Immature:</source>
<translation>Immature:</translation>
</message>
<message>
- <location line="-29"/>
<source>Mined balance that has not yet matured</source>
<translation>Mined balance that has not yet matured</translation>
</message>
<message>
- <location line="-93"/>
<source>Balances</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+83"/>
<source>Total:</source>
<translation>Total:</translation>
</message>
<message>
- <location line="+49"/>
<source>Your current total balance</source>
<translation>Your current total balance</translation>
</message>
<message>
- <location line="+88"/>
<source>Recent transactions</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../overviewpage.cpp" line="+176"/>
<source>Privacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values.</source>
<translation type="unfinished"></translation>
</message>
@@ -2265,57 +1819,46 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>PSBTOperationsDialog</name>
<message>
- <location filename="../forms/psbtoperationsdialog.ui" line="+14"/>
<source>PSBT Operations</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+72"/>
<source>Sign Tx</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Broadcast Tx</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+20"/>
<source>Copy to Clipboard</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Save…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Close</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../psbtoperationsdialog.cpp" line="+64"/>
<source>Failed to load transaction: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+25"/>
<source>Failed to sign transaction: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Cannot sign inputs while wallet is locked.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Could not sign any more inputs.</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+2"/>
<source>Signed %n input(s), but more signatures are still required.</source>
<translation type="unfinished">
<numerusform>Signed %n input, but more signatures are still required.</numerusform>
@@ -2323,78 +1866,63 @@ The migration process will create a backup of the wallet before migrating. This
</translation>
</message>
<message>
- <location line="+3"/>
<source>Signed transaction successfully. Transaction is ready to broadcast.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Unknown error processing transaction.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Transaction broadcast successfully! Transaction ID: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Transaction broadcast failed: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>PSBT copied to clipboard.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Save Transaction Data</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Partially Signed Transaction (Binary)</source>
<extracomment>Expanded name of the binary PSBT file format. See: BIP 174.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>PSBT saved to disk.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>Sends %1 to %2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>own address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Unable to calculate transaction fee or total transaction amount.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Pays transaction fee: </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Total Amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>or</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+6"/>
<source>Transaction has %n unsigned input(s).</source>
<translation type="unfinished">
<numerusform>Transaction has %n unsigned input.</numerusform>
@@ -2402,37 +1930,30 @@ The migration process will create a backup of the wallet before migrating. This
</translation>
</message>
<message>
- <location line="+46"/>
<source>Transaction is missing some information about inputs.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Transaction still needs signature(s).</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>(But no wallet is loaded.)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>(But this wallet cannot sign transactions.)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>(But this wallet does not have the right keys.)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Transaction is fully signed and ready for broadcast.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Transaction status is unknown.</source>
<translation type="unfinished"></translation>
</message>
@@ -2440,43 +1961,32 @@ The migration process will create a backup of the wallet before migrating. This
<context>
<name>PaymentServer</name>
<message>
- <location filename="../paymentserver.cpp" line="+145"/>
<source>Payment request error</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Cannot start bitcoin: click-to-pay handler</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+48"/>
- <location line="+16"/>
- <location line="+6"/>
- <location line="+7"/>
<source>URI handling</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-29"/>
<source>'bitcoin://' is not a valid URI. Use 'bitcoin:' instead.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
- <location line="+23"/>
<source>Cannot process payment request because BIP70 is not supported.
Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored.
If you are receiving this error you should request the merchant provide a BIP21 compatible URI.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-10"/>
<source>URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Payment request file handling</source>
<translation type="unfinished"></translation>
</message>
@@ -2484,73 +1994,61 @@ If you are receiving this error you should request the merchant provide a BIP21
<context>
<name>PeerTableModel</name>
<message>
- <location filename="../peertablemodel.h" line="+112"/>
<source>User Agent</source>
<extracomment>Title of Peers Table column which contains the peer's User Agent string.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-9"/>
<source>Ping</source>
<extracomment>Title of Peers Table column which indicates the current latency of the connection with the peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-18"/>
<source>Peer</source>
<extracomment>Title of Peers Table column which contains a unique number used to identify a connection.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Age</source>
<extracomment>Title of Peers Table column which indicates the duration (length of time) since the peer connection started.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Direction</source>
<extracomment>Title of Peers Table column which indicates the direction the peer connection was initiated from.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Sent</source>
<extracomment>Title of Peers Table column which indicates the total amount of network information we have sent to the peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Received</source>
<extracomment>Title of Peers Table column which indicates the total amount of network information we have received from the peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-18"/>
<source>Address</source>
<extracomment>Title of Peers Table column which contains the IP/Onion/I2P address of the connected peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Type</source>
<extracomment>Title of Peers Table column which describes the type of peer connection. The "type" describes why the connection exists.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Network</source>
<extracomment>Title of Peers Table column which states the network the peer connected through.</extracomment>
<translation type="unfinished">Network</translation>
</message>
<message>
- <location filename="../peertablemodel.cpp" line="+77"/>
<source>Inbound</source>
<extracomment>An Inbound Connection from a Peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Outbound</source>
<extracomment>An Outbound Connection to a Peer.</extracomment>
<translation type="unfinished"></translation>
@@ -2559,150 +2057,120 @@ If you are receiving this error you should request the merchant provide a BIP21
<context>
<name>QObject</name>
<message>
- <location filename="../bitcoinunits.cpp" line="+197"/>
<source>Amount</source>
<translation type="unfinished">Amount</translation>
</message>
<message>
- <location filename="../guiutil.cpp" line="+138"/>
<source>Enter a Bitcoin address (e.g. %1)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+288"/>
<source>Ctrl+W</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+257"/>
<source>Unroutable</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>IPv4</source>
<comment>network name</comment>
<extracomment>Name of IPv4 network in peer info</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>IPv6</source>
<comment>network name</comment>
<extracomment>Name of IPv6 network in peer info</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Onion</source>
<comment>network name</comment>
<extracomment>Name of Tor network in peer info</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>I2P</source>
<comment>network name</comment>
<extracomment>Name of I2P network in peer info</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>CJDNS</source>
<comment>network name</comment>
<extracomment>Name of CJDNS network in peer info</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+14"/>
<source>Inbound</source>
<extracomment>An inbound connection from a peer. An inbound connection is a connection initiated by a peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Outbound</source>
<extracomment>An outbound connection to a peer. An outbound connection is a connection initiated by us.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Full Relay</source>
<extracomment>Peer connection type that relays all network information.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Block Relay</source>
<extracomment>Peer connection type that relays network information about blocks and not transactions or addresses.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Manual</source>
<extracomment>Peer connection type established manually through one of several methods.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Feeler</source>
<extracomment>Short-lived peer connection type that tests the aliveness of known addresses.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Address Fetch</source>
<extracomment>Short-lived peer connection type that solicits known addresses from a peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Private Broadcast</source>
<extracomment>Short-lived peer connection type that is used for broadcasting privacy-sensitive data.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
- <location line="+12"/>
<source>%1 d</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-11"/>
- <location line="+12"/>
<source>%1 h</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-11"/>
- <location line="+12"/>
<source>%1 m</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-10"/>
- <location line="+11"/>
- <location line="+26"/>
<source>%1 s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-12"/>
<source>None</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>N/A</source>
<translation type="unfinished">N/A</translation>
</message>
<message>
- <location line="+1"/>
<source>%1 ms</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+18"/>
<source>%n second(s)</source>
<translation>
<numerusform>%n second</numerusform>
@@ -2710,7 +2178,6 @@ If you are receiving this error you should request the merchant provide a BIP21
</translation>
</message>
<message numerus="yes">
- <location line="+4"/>
<source>%n minute(s)</source>
<translation>
<numerusform>%n minute</numerusform>
@@ -2718,7 +2185,6 @@ If you are receiving this error you should request the merchant provide a BIP21
</translation>
</message>
<message numerus="yes">
- <location line="+4"/>
<source>%n hour(s)</source>
<translation type="unfinished">
<numerusform>%n hour</numerusform>
@@ -2726,7 +2192,6 @@ If you are receiving this error you should request the merchant provide a BIP21
</translation>
</message>
<message numerus="yes">
- <location line="+4"/>
<source>%n day(s)</source>
<translation type="unfinished">
<numerusform>%n day</numerusform>
@@ -2734,8 +2199,6 @@ If you are receiving this error you should request the merchant provide a BIP21
</translation>
</message>
<message numerus="yes">
- <location line="+4"/>
- <location line="+6"/>
<source>%n week(s)</source>
<translation type="unfinished">
<numerusform>%n week</numerusform>
@@ -2743,12 +2206,10 @@ If you are receiving this error you should request the merchant provide a BIP21
</translation>
</message>
<message>
- <location line="+0"/>
<source>%1 and %2</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+0"/>
<source>%n year(s)</source>
<translation type="unfinished">
<numerusform>%n year</numerusform>
@@ -2756,72 +2217,56 @@ If you are receiving this error you should request the merchant provide a BIP21
</translation>
</message>
<message>
- <location line="+8"/>
<source>%1 B</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
- <location filename="../rpcconsole.cpp" line="+985"/>
<source>%1 kB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
- <location filename="../rpcconsole.cpp" line="+1"/>
- <location line="+1"/>
<source>%1 MB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>%1 GB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+159"/>
<source>default wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../bitcoin.cpp" line="-288"/>
<source>Do you want to reset settings to default values, or to abort without making changes?</source>
<extracomment>Explanatory text shown on startup when the settings file cannot be read. Prompts user to make a choice between resetting or aborting.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+20"/>
<source>A fatal error occurred. Check that settings file is writable, or try running with -nosettings.</source>
<extracomment>Explanatory text shown on startup when the settings file could not be written. Prompts user to check that we have the ability to write to the file. Explains that the user has the option of running without a settings file.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+418"/>
<source>Error: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+73"/>
<source>%1 didn't yet exit safely…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../modaloverlay.cpp" line="-40"/>
<source>unknown</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../optionsdialog.cpp" line="-385"/>
<source>Embedded "%1"</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Default system font "%1"</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Custom…</source>
<translation type="unfinished"></translation>
</message>
@@ -2829,37 +2274,30 @@ If you are receiving this error you should request the merchant provide a BIP21
<context>
<name>QRImageWidget</name>
<message>
- <location filename="../qrimagewidget.cpp" line="+28"/>
<source>&Save Image…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>&Copy Image</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>Resulting URI too long, try to reduce the text for label / message.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Error encoding URI into QR Code.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+41"/>
<source>QR code support not available.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+34"/>
<source>Save QR Code</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>PNG Image</source>
<extracomment>Expanded name of the PNG file format. See: https://en.wikipedia.org/wiki/Portable_Network_Graphics.</extracomment>
<translation type="unfinished"></translation>
@@ -2868,668 +2306,505 @@ If you are receiving this error you should request the merchant provide a BIP21
<context>
<name>RPCConsole</name>
<message>
- <location filename="../forms/debugwindow.ui" line="+75"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+29"/>
- <location line="+26"/>
- <location line="+36"/>
- <location line="+23"/>
- <location line="+71"/>
- <location line="+23"/>
- <location line="+36"/>
- <location line="+23"/>
- <location line="+767"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+29"/>
- <location line="+26"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+26"/>
- <location line="+23"/>
- <location line="+23"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+26"/>
- <location line="+26"/>
- <location filename="../rpcconsole.h" line="+147"/>
<source>N/A</source>
<translation>N/A</translation>
</message>
<message>
- <location line="-1736"/>
<source>Client version</source>
<translation>Client version</translation>
</message>
<message>
- <location line="-22"/>
<source>&Information</source>
<translation>&Information</translation>
</message>
<message>
- <location line="+15"/>
<source>General</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+56"/>
<source>Datadir</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>To specify a non-default location of the data directory use the '%1' option.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Blocksdir</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>To specify a non-default location of the blocks directory use the '%1' option.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Startup time</source>
<translation>Startup time</translation>
</message>
<message>
- <location line="+29"/>
- <location line="+1054"/>
<source>Network</source>
<translation>Network</translation>
</message>
<message>
- <location line="-1047"/>
<source>Name</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Number of connections</source>
<translation>Number of connections</translation>
</message>
<message>
- <location line="+23"/>
<source>Local Addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+28"/>
<source>Network addresses that your Bitcoin node is currently using to communicate with other nodes.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Block chain</source>
<translation>Block chain</translation>
</message>
<message>
- <location line="+59"/>
<source>Memory Pool</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Current number of transactions</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Memory usage</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+94"/>
<source>Wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>(none)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+211"/>
<source>&Reset</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+80"/>
- <location line="+812"/>
<source>Received</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-732"/>
- <location line="+709"/>
<source>Sent</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-668"/>
<source>&Peers</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+76"/>
<source>Banned peers</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+76"/>
- <location filename="../rpcconsole.cpp" line="+166"/>
<source>Select a peer to view detailed information.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+52"/>
<source>Hide Peers Detail</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>Ctrl+X</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+74"/>
<source>The transport layer version: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Transport</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>Session ID</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+49"/>
<source>Version</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+72"/>
<source>Whether we relay transactions to this peer.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Transaction Relay</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+49"/>
<source>Synced Headers</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Synced Blocks</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+75"/>
<source>Last Transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+210"/>
<source>The mapped Autonomous System used for diversifying peer selection.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Mapped AS</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Whether we relay addresses to this peer.</source>
<extracomment>Tooltip text for the Address Relay field in the peer details area, which displays whether we relay addresses to this peer (Yes/No).</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Address Relay</source>
<extracomment>Text title for the Address Relay field in the peer details area, which displays whether we relay addresses to this peer (Yes/No).</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>The total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting).</source>
<extracomment>Tooltip text for the Addresses Processed field in the peer details area, which displays the total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting).</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>The total number of addresses received from this peer that were dropped (not processed) due to rate-limiting.</source>
<extracomment>Tooltip text for the Addresses Rate-Limited field in the peer details area, which displays the total number of addresses received from this peer that were dropped (not processed) due to rate-limiting.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-23"/>
<source>Addresses Processed</source>
<extracomment>Text title for the Addresses Processed field in the peer details area, which displays the total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting).</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>Addresses Rate-Limited</source>
<extracomment>Text title for the Addresses Rate-Limited field in the peer details area, which displays the total number of addresses received from this peer that were dropped (not processed) due to rate-limiting.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-1703"/>
- <location line="+1213"/>
<source>User Agent</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-1287"/>
<source>Node window</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+288"/>
<source>Current block height</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+130"/>
<source>Open the %1 debug log file from the current data directory. This can take a few seconds for large log files.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+78"/>
<source>Decrease font size</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+20"/>
<source>Increase font size</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+621"/>
<source>Permissions</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>The direction and type of peer connection: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Direction/Type</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+49"/>
<source>The BIP324 session ID string in hex.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>The network protocol this peer is connected through: IPv4, IPv6, Onion, I2P, or CJDNS.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+72"/>
<source>Services</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+52"/>
<source>High bandwidth BIP152 compact block relay: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>High Bandwidth</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+69"/>
<source>Connection Time</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Elapsed time since a novel block passing initial validity checks was received from this peer.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Last Block</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Elapsed time since a novel transaction accepted into our mempool was received from this peer.</source>
<extracomment>Tooltip text for the Last Transaction field in the peer details area.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>Last Send</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Last Receive</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+69"/>
<source>Ping Time</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>The duration of a currently outstanding ping.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Ping Wait</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Min Ping</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Time Offset</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-1362"/>
<source>Last block time</source>
<translation>Last block time</translation>
</message>
<message>
- <location line="+110"/>
<source>&Open</source>
<translation>&Open</translation>
</message>
<message>
- <location line="+26"/>
<source>&Console</source>
<translation>&Console</translation>
</message>
<message>
- <location line="+187"/>
<source>&Network Traffic</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+68"/>
<source>Totals</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../rpcconsole.cpp" line="-216"/>
<source>In:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Out:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../forms/debugwindow.ui" line="-291"/>
<source>Debug log file</source>
<translation>Debug log file</translation>
</message>
<message>
- <location line="+125"/>
<source>Clear console</source>
<translation>Clear console</translation>
</message>
<message>
- <location filename="../rpcconsole.h" line="-1"/>
<source>Yes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>No</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>To</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>From</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Ban for</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+41"/>
<source>Never</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../rpcconsole.cpp" line="-472"/>
<source>Inbound: initiated by peer</source>
<extracomment>Explanatory text for an inbound peer connection.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Outbound Full Relay: default</source>
<extracomment>Explanatory text for an outbound peer connection that relays all network information. This is the default behavior for outbound connections.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Outbound Block Relay: does not relay transactions or addresses</source>
<extracomment>Explanatory text for an outbound peer connection that relays network information about blocks and not transactions or addresses.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Outbound Manual: added using RPC %1 or %2/%3 configuration options</source>
<extracomment>Explanatory text for an outbound peer connection that was established manually through one of several methods. The numbered arguments are stand-ins for the methods available to establish manual connections.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Outbound Feeler: short-lived, for testing addresses</source>
<extracomment>Explanatory text for a short-lived outbound peer connection that is used to test the aliveness of known addresses.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Outbound Address Fetch: short-lived, for soliciting addresses</source>
<extracomment>Explanatory text for a short-lived outbound peer connection that is used to request addresses from a peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Private broadcast: short-lived, for broadcasting privacy-sensitive transactions</source>
<extracomment>Explanatory text for a short-lived outbound peer connection that is used to broadcast privacy-sensitive data (like our transactions).</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>detecting: peer could be v1 or v2</source>
<extracomment>Explanatory text for "detecting" transport type.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>v1: unencrypted, plaintext transport protocol</source>
<extracomment>Explanatory text for v1 transport type.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>v2: BIP324 encrypted transport protocol</source>
<extracomment>Explanatory text for v2 transport type.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>we selected the peer for high bandwidth relay</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>the peer selected us for high bandwidth relay</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>no high bandwidth relay selected</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Ctrl++</source>
<extracomment>Main shortcut to increase the RPC console font size.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Ctrl+=</source>
<extracomment>Secondary shortcut to increase the RPC console font size.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Ctrl+-</source>
<extracomment>Main shortcut to decrease the RPC console font size.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Ctrl+_</source>
<extracomment>Secondary shortcut to decrease the RPC console font size.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+146"/>
<source>&Copy address</source>
<extracomment>Context menu action to copy the address of a peer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>&Disconnect</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>1 &hour</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>1 d&ay</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>1 &week</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>1 &year</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>&Copy IP/Netmask</source>
<extracomment>Context menu action to copy the IP/Netmask of a banned peer. IP/Netmask is the combination of a peer's IP address and its Netmask. For IP address, see: https://en.wikipedia.org/wiki/IP_address.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>&Unban</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+231"/>
<source>Network activity disabled</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>None</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+79"/>
<source>Executing command without any wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+321"/>
<source>Ctrl+I</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Ctrl+T</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Ctrl+N</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Ctrl+P</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+18"/>
<source>Node window - [%1]</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-344"/>
<source>Executing command using "%1" wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-161"/>
<source>Welcome to the %1 RPC console.
Use up and down arrows to navigate history, and %2 to clear screen.
Use %3 and %4 to increase or decrease the font size.
@@ -3541,23 +2816,19 @@ For more information on using this console, type %6.
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+171"/>
<source>Executing…</source>
<extracomment>A console message indicating an entered command is currently being executed.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+118"/>
<source>(peer: %1)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>via %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../rpcconsole.h" line="-41"/>
<source>Unknown</source>
<translation type="unfinished"></translation>
</message>
@@ -3565,163 +2836,130 @@ For more information on using this console, type %6.
<context>
<name>ReceiveCoinsDialog</name>
<message>
- <location filename="../forms/receivecoinsdialog.ui" line="+37"/>
<source>&Amount:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+46"/>
<source>&Label:</source>
<translation type="unfinished">&Label:</translation>
</message>
<message>
- <location line="-30"/>
<source>&Message:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-3"/>
<source>An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>An optional label to associate with the new receiving address.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-7"/>
<source>Use this form to request payments. All fields are <b>optional</b>.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-39"/>
- <location line="+159"/>
<source>An optional amount to request. Leave this empty or zero to not request a specific amount.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-127"/>
<source>An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>An optional message that is attached to the payment request and may be displayed to the sender.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+15"/>
<source>&Create new receiving address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Clear all fields of the form.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Clear</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+136"/>
<source>Requested payments history</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+25"/>
<source>Show the selected request (does the same as double clicking an entry)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Show</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>Remove the selected entries from the list</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Remove</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../receivecoinsdialog.cpp" line="+46"/>
<source>Copy &URI</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>&Copy address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &message</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+46"/>
<source>Base58 (Legacy)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Not recommended due to higher fees and less protection against typos.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Base58 (P2SH-SegWit)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Generates an address compatible with older wallets.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Bech32 (SegWit)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Generates a native segwit address (BIP-173). Some old wallets don't support it.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Bech32m (Taproot)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Bech32m (BIP-350) is an upgrade to Bech32, wallet support is still limited.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+75"/>
<source>Could not unlock wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Could not generate new %1 address</source>
<translation type="unfinished"></translation>
</message>
@@ -3729,67 +2967,54 @@ For more information on using this console, type %6.
<context>
<name>ReceiveRequestDialog</name>
<message>
- <location filename="../forms/receiverequestdialog.ui" line="+14"/>
<source>Request payment to …</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+76"/>
<source>Address:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+29"/>
<source>Amount:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+29"/>
<source>Label:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Message:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Wallet:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+28"/>
<source>Copy &URI</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Copy &Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>&Verify</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Verify this address on e.g. a hardware wallet screen</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>&Save Image…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../receiverequestdialog.cpp" line="+46"/>
<source>Request payment to %1</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../forms/receiverequestdialog.ui" line="-234"/>
<source>Payment information</source>
<translation type="unfinished"></translation>
</message>
@@ -3797,37 +3022,30 @@ For more information on using this console, type %6.
<context>
<name>RecentRequestsTableModel</name>
<message>
- <location filename="../recentrequeststablemodel.cpp" line="+34"/>
<source>Date</source>
<translation type="unfinished">Date</translation>
</message>
<message>
- <location line="+0"/>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Message</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+38"/>
<source>(no label)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>(no message)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>(no amount requested)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+43"/>
<source>Requested</source>
<translation type="unfinished"></translation>
</message>
@@ -3835,31 +3053,26 @@ For more information on using this console, type %6.
<context>
<name>RestoreWalletActivity</name>
<message>
- <location filename="../walletcontroller.cpp" line="+50"/>
<source>Restore Wallet</source>
<extracomment>Title of progress window which is displayed when wallets are being restored.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Restoring Wallet <b>%1</b>…</source>
<extracomment>Descriptive text of the restore wallets progress window which indicates to the user that wallets are currently being restored.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Restore wallet failed</source>
<extracomment>Title of message box which is displayed when the wallet could not be restored.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Restore wallet warning</source>
<extracomment>Title of message box which is displayed when the wallet is restored with some warning.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Restore wallet message</source>
<extracomment>Title of message box which is displayed when the wallet is successfully restored.</extracomment>
<translation type="unfinished"></translation>
@@ -3868,425 +3081,342 @@ For more information on using this console, type %6.
<context>
<name>SendCoinsDialog</name>
<message>
- <location filename="../forms/sendcoinsdialog.ui" line="+14"/>
- <location filename="../sendcoinsdialog.cpp" line="+758"/>
<source>Send Coins</source>
<translation>Send Coins</translation>
</message>
<message>
- <location line="+76"/>
<source>Coin Control Features</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>automatically selected</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Insufficient funds!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+92"/>
<source>Quantity:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+35"/>
<source>Bytes:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+48"/>
<source>Amount:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+51"/>
<source>Fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+54"/>
<source>After Fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+32"/>
<source>Change:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+44"/>
<source>If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Custom change address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+206"/>
<source>Transaction Fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+38"/>
<source>Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Warning: Fee estimation is currently not possible.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+82"/>
<source>per kilobyte</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-53"/>
<source>Hide</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+112"/>
<source>Recommended:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>Custom:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+215"/>
<source>Send to multiple recipients at once</source>
<translation>Send to multiple recipients at once</translation>
</message>
<message>
- <location line="+3"/>
<source>Add &Recipient</source>
<translation>Add &Recipient</translation>
</message>
<message>
- <location line="-20"/>
<source>Clear all fields of the form.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-1010"/>
<source>Inputs…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+608"/>
<source>Choose…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+59"/>
<source>Hide transaction fee settings</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+51"/>
<source>Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size.
Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 satoshis per kvB" for a transaction size of 500 virtual bytes (half of 1 kvB) would ultimately yield a fee of only 50 satoshis.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+35"/>
<source>When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>A too low fee might result in a never confirming transaction (read the tooltip)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+105"/>
<source>(Smart fee not initialized yet. This usually takes a few blocks…)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+26"/>
<source>Confirmation time target:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+58"/>
<source>Enable Replace-By-Fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+65"/>
<source>Clear &All</source>
<translation>Clear &All</translation>
</message>
<message>
- <location line="+55"/>
<source>Balance:</source>
<translation>Balance:</translation>
</message>
<message>
- <location line="-84"/>
<source>Confirm the send action</source>
<translation>Confirm the send action</translation>
</message>
<message>
- <location line="+3"/>
<source>S&end</source>
<translation>S&end</translation>
</message>
<message>
- <location filename="../sendcoinsdialog.cpp" line="-660"/>
<source>Copy quantity</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy after fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy change</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+70"/>
<source>%1 (%2 blocks)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>Sign on device</source>
<extracomment>"device" usually means a hardware wallet.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Connect your hardware wallet first.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Set external signer script path in Options -> Wallet</source>
<extracomment>"External signer" means using devices such as hardware wallets.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Cr&eate Unsigned</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Creates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+103"/>
<source>%1 to '%2'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>%1 to %2</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+67"/>
<source>To review recipient list click "Show Details…"</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+63"/>
<source>Sign failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>External signer not found</source>
<extracomment>"External signer" means using devices such as hardware wallets.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>External signer failure</source>
<extracomment>"External signer" means using devices such as hardware wallets.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-36"/>
<source>Save Transaction Data</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Partially Signed Transaction (Binary)</source>
<extracomment>Expanded name of the binary PSBT file format. See: BIP 174.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>PSBT saved</source>
<extracomment>Popup message when a PSBT has been saved to a file</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+273"/>
<source>External balance:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-325"/>
<source>or</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-18"/>
<source>You can increase the fee later (signals Replace-By-Fee, BIP-125).</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-31"/>
<source>Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.</source>
<extracomment>Text to inform a user attempting to create a transaction of their current options. At this stage, a user can only create a PSBT. This string is displayed when private keys are disabled and an external signer is not available.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-30"/>
<source>%1 from wallet '%2'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+24"/>
<source>Do you want to create this transaction?</source>
<extracomment>Message displayed when attempting to create a transaction. Cautionary text to prompt the user to verify that the displayed transaction details represent the transaction the user intends to create.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>Please, review your transaction. You can create and send this transaction or create a Partially Signed Bitcoin Transaction (PSBT), which you can save or copy and then sign with, e.g., an offline %1 wallet, or a PSBT-compatible hardware wallet.</source>
<extracomment>Text to inform a user attempting to create a transaction of their current options. At this stage, a user can send their transaction or create a PSBT. This string is displayed when both private keys and PSBT controls are enabled.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Please, review your transaction.</source>
<extracomment>Text to prompt a user to review the details of the transaction they are attempting to send.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Transaction fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>%1 kvB</source>
<comment>PSBT transaction creation</comment>
<extracomment>When reviewing a newly created PSBT (via Send flow), the transaction fee is shown, with "virtual size" of the transaction displayed for context</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Not signalling Replace-By-Fee, BIP-125.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Total Amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+24"/>
<source>Unsigned Transaction</source>
<comment>PSBT copied</comment>
<extracomment>Caption of "PSBT has been copied" messagebox</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>The PSBT has been copied to the clipboard. You can also save it.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+30"/>
<source>PSBT saved to disk</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+49"/>
<source>Confirm send coins</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+248"/>
<source>The recipient address is not valid. Please recheck.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>The amount to pay must be larger than 0.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>The amount exceeds your balance.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Duplicate address found: addresses should only be used once each.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Transaction creation failed!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>A fee higher than %1 is considered an absurdly high fee.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+76"/>
- <location line="+37"/>
<source>%1/kvB</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="+14"/>
<source>Estimated to begin confirmation within %n block(s).</source>
<translation>
<numerusform>Estimated to begin confirmation within %n block.</numerusform>
@@ -4294,27 +3424,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
</translation>
</message>
<message>
- <location line="+99"/>
<source>Warning: Invalid Bitcoin address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Warning: Unknown change address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Confirm custom change address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>(no label)</source>
<translation type="unfinished"></translation>
</message>
@@ -4322,83 +3447,66 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>SendCoinsEntry</name>
<message>
- <location filename="../forms/sendcoinsentry.ui" line="+151"/>
<source>A&mount:</source>
<translation>A&mount:</translation>
</message>
<message>
- <location line="-116"/>
<source>Pay &To:</source>
<translation>Pay &To:</translation>
</message>
<message>
- <location line="+93"/>
<source>&Label:</source>
<translation>&Label:</translation>
</message>
<message>
- <location line="-68"/>
<source>Choose previously used address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-7"/>
<source>The Bitcoin address to send the payment to</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+23"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
- <location line="+7"/>
<source>Paste address from clipboard</source>
<translation>Paste address from clipboard</translation>
</message>
<message>
- <location line="+16"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
- <location line="+7"/>
<source>Remove this entry</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+60"/>
<source>The amount to send in the selected unit</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>S&ubtract fee from amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Use available balance</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Message:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-51"/>
- <location line="+3"/>
<source>Enter a label for this address to add it to the list of used addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+58"/>
<source>A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.</source>
<translation type="unfinished"></translation>
</message>
@@ -4406,12 +3514,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>SendConfirmationDialog</name>
<message>
- <location filename="../sendcoinsdialog.h" line="+151"/>
<source>Send</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Create Unsigned</source>
<translation type="unfinished"></translation>
</message>
@@ -4419,12 +3525,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>ShutdownWindow</name>
<message>
- <location filename="../utilitydialog.cpp" line="+89"/>
<source>%1 is shutting down…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Do not shut down the computer until this window disappears.</source>
<translation type="unfinished"></translation>
</message>
@@ -4432,197 +3536,150 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>SignVerifyMessageDialog</name>
<message>
- <location filename="../forms/signverifymessagedialog.ui" line="+14"/>
<source>Signatures - Sign / Verify a Message</source>
<translation>Signatures - Sign / Verify a Message</translation>
</message>
<message>
- <location line="+13"/>
<source>&Sign Message</source>
<translation>&Sign Message</translation>
</message>
<message>
- <location line="+6"/>
<source>You can sign messages/agreements with your legacy (P2PKH) addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+18"/>
<source>The Bitcoin address to sign the message with</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
- <location line="+216"/>
<source>Choose previously used address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-206"/>
- <location line="+216"/>
<source>Alt+A</source>
<translation>Alt+A</translation>
</message>
<message>
- <location line="-206"/>
<source>Paste address from clipboard</source>
<translation>Paste address from clipboard</translation>
</message>
<message>
- <location line="+10"/>
<source>Alt+P</source>
<translation>Alt+P</translation>
</message>
<message>
- <location line="+12"/>
- <location line="+3"/>
<source>Enter the message you want to sign here</source>
<translation>Enter the message you want to sign here</translation>
</message>
<message>
- <location line="+7"/>
<source>Signature</source>
<translation>Signature</translation>
</message>
<message>
- <location line="+30"/>
<source>Copy the current signature to the clipboard</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>Sign the message to prove you own this Bitcoin address</source>
<translation>Sign the message to prove you own this Bitcoin address</translation>
</message>
<message>
- <location line="+3"/>
<source>Sign &Message</source>
<translation>Sign &Message</translation>
</message>
<message>
- <location line="+14"/>
<source>Reset all sign message fields</source>
<translation>Reset all sign message fields</translation>
</message>
<message>
- <location line="+3"/>
- <location line="+157"/>
<source>Clear &All</source>
<translation>Clear &All</translation>
</message>
<message>
- <location line="-98"/>
<source>&Verify Message</source>
<translation>&Verify Message</translation>
</message>
<message>
- <location line="+6"/>
<source>Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>The Bitcoin address the message was signed with</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+29"/>
- <location line="+3"/>
<source>The signed message to verify</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
- <location line="+3"/>
<source>The signature given when the message was signed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Verify the message to ensure it was signed with the specified Bitcoin address</source>
<translation>Verify the message to ensure it was signed with the specified Bitcoin address</translation>
</message>
<message>
- <location line="+3"/>
<source>Verify &Message</source>
<translation>Verify &Message</translation>
</message>
<message>
- <location line="+14"/>
<source>Reset all verify message fields</source>
<translation>Reset all verify message fields</translation>
</message>
<message>
- <location line="-210"/>
<source>Click "Sign Message" to generate signature</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location filename="../signverifymessagedialog.cpp" line="+122"/>
- <location line="+99"/>
<source>The entered address is invalid.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-99"/>
- <location line="+100"/>
<source>Please check the address and try again.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-93"/>
- <location line="+98"/>
<source>The entered address does not refer to a legacy (P2PKH) key. Message signing for SegWit and other non-P2PKH address types is not supported in this version of %1. Please check the address and try again.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-90"/>
<source>Wallet unlock was cancelled.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>No error</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Private key for the entered address is not available.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Message signing failed.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Message signed.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+66"/>
<source>The signature could not be decoded.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
- <location line="+7"/>
<source>Please check the signature and try again.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-1"/>
<source>The signature did not match the message digest.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Message verification failed.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-29"/>
<source>Message verified.</source>
<translation type="unfinished"></translation>
</message>
@@ -4630,12 +3687,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>SplashScreen</name>
<message>
- <location filename="../splashscreen.cpp" line="+175"/>
<source>(press q to shutdown and continue later)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>press q to shutdown</source>
<translation type="unfinished"></translation>
</message>
@@ -4643,7 +3698,6 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>TrafficGraphWidget</name>
<message>
- <location filename="../trafficgraphwidget.cpp" line="+74"/>
<source>kB/s</source>
<translation type="unfinished"></translation>
</message>
@@ -4651,101 +3705,76 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>TransactionDesc</name>
<message>
- <location filename="../transactiondesc.cpp" line="+34"/>
<source>conflicted with a transaction with %1 confirmations</source>
<extracomment>Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that conflicts with a confirmed transaction.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>0/unconfirmed, in memory pool</source>
<extracomment>Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that is in the memory pool.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>0/unconfirmed, not in memory pool</source>
<extracomment>Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that is not in the memory pool.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>abandoned</source>
<extracomment>Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an abandoned transaction.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>%1/unconfirmed</source>
<extracomment>Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents a transaction confirmed in at least one block, but less than 6 blocks.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>%1 confirmations</source>
<extracomment>Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents a transaction confirmed in 6 or more blocks.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+50"/>
<source>Status</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Date</source>
<translation type="unfinished">Date</translation>
</message>
<message>
- <location line="+7"/>
<source>Source</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Generated</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
- <location line="+13"/>
<source>From</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>unknown</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
- <location line="+20"/>
- <location line="+57"/>
<source>To</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-75"/>
- <location line="+82"/>
<source>own address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-80"/>
<source>label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+36"/>
- <location line="+12"/>
- <location line="+39"/>
- <location line="+30"/>
- <location line="+60"/>
<source>Credit</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
- <location line="-139"/>
<source>matures in %n more block(s)</source>
<translation>
<numerusform>matures in %n more block</numerusform>
@@ -4753,110 +3782,86 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
</translation>
</message>
<message>
- <location line="+2"/>
<source>not accepted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+45"/>
- <location line="+26"/>
- <location line="+63"/>
<source>Debit</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-79"/>
<source>Total debit</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Total credit</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Transaction fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+22"/>
<source>Net amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
- <location line="+12"/>
<source>Message</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-10"/>
<source>Comment</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Transaction ID</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Transaction total size</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Transaction virtual size</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Output index</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>%1 (Certificate was not verified)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Merchant</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Debug information</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Inputs</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Amount</source>
<translation type="unfinished">Amount</translation>
</message>
<message>
- <location line="+1"/>
<source>true</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>false</source>
<translation type="unfinished"></translation>
</message>
@@ -4864,12 +3869,10 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>TransactionDescDialog</name>
<message>
- <location filename="../forms/transactiondescdialog.ui" line="+20"/>
<source>This pane shows a detailed description of the transaction</source>
<translation>This pane shows a detailed description of the transaction</translation>
</message>
<message>
- <location filename="../transactiondescdialog.cpp" line="+18"/>
<source>Details for %1</source>
<translation type="unfinished"></translation>
</message>
@@ -4877,107 +3880,86 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>TransactionTableModel</name>
<message>
- <location filename="../transactiontablemodel.cpp" line="+257"/>
<source>Date</source>
<translation type="unfinished">Date</translation>
</message>
<message>
- <location line="+0"/>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+59"/>
<source>Unconfirmed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Abandoned</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Confirming (%1 of %2 recommended confirmations)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Confirmed (%1 confirmations)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Conflicted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Immature (%1 confirmations, will be available after %2)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Generated but not accepted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+39"/>
<source>Received with</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Received from</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Sent to</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Mined</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+36"/>
<source>(n/a)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+188"/>
<source>(no label)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+39"/>
<source>Transaction status. Hover over this field to show number of confirmations.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Date and time that the transaction was received.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Type of transaction.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>User-defined intent/purpose of the transaction.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Amount removed from or added to balance.</source>
<translation type="unfinished"></translation>
</message>
@@ -4985,195 +3967,156 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>TransactionView</name>
<message>
- <location filename="../transactionview.cpp" line="+66"/>
- <location line="+16"/>
<source>All</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-15"/>
<source>Today</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>This week</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>This month</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Last month</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>This year</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Received with</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Sent to</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Mined</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Other</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Enter address, transaction id, or label to search</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Min amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-25"/>
<source>Range…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+88"/>
<source>&Copy address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy transaction &ID</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy &raw transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copy full transaction &details</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>&Show transaction details</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Increase transaction &fee</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>A&bandon transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>&Edit address label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+59"/>
<source>Show in %1</source>
<extracomment>Transactions table context menu action to show the selected transaction in a third-party block explorer. %1 is a stand-in argument for the URL of the explorer.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+96"/>
<source>Export Transaction History</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Comma separated file</source>
<extracomment>Expanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Confirmed</source>
<translation type="unfinished">Confirmed</translation>
</message>
<message>
- <location line="+1"/>
<source>Date</source>
<translation type="unfinished">Date</translation>
</message>
<message>
- <location line="+1"/>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Address</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>ID</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Exporting Failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>There was an error trying to save the transaction history to %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Exporting Successful</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>The transaction history was successfully saved to %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+175"/>
<source>Range:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>to</source>
<translation type="unfinished"></translation>
</message>
@@ -5181,7 +4124,6 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>UnitDisplayStatusBarControl</name>
<message>
- <location filename="../bitcoingui.cpp" line="+46"/>
<source>Unit to show amounts in. Click to select another unit.</source>
<translation type="unfinished"></translation>
</message>
@@ -5189,27 +4131,22 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>WalletController</name>
<message>
- <location filename="../walletcontroller.cpp" line="-341"/>
<source>Close wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Are you sure you wish to close the wallet <i>%1</i>?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Close all wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Are you sure you wish to close all wallets?</source>
<translation type="unfinished"></translation>
</message>
@@ -5217,46 +4154,36 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100
<context>
<name>WalletFrame</name>
<message>
- <location filename="../walletframe.cpp" line="+45"/>
<source>No wallet has been loaded.
Go to File > Open Wallet to load a wallet.
- OR -</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Create a new wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+151"/>
- <location line="+10"/>
- <location line="+18"/>
<source>Error</source>
<translation type="unfinished">Error</translation>
</message>
<message>
- <location line="-28"/>
<source>Unable to decode PSBT from clipboard (invalid base64)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Load Transaction Data</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Partially Signed Transaction (*.psbt)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>PSBT file must be smaller than 100 MiB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+18"/>
<source>Unable to decode PSBT</source>
<translation type="unfinished"></translation>
</message>
@@ -5264,87 +4191,67 @@ Go to File > Open Wallet to load a wallet.
<context>
<name>WalletModel</name>
<message>
- <location filename="../walletmodel.cpp" line="+208"/>
- <location line="+20"/>
<source>Send Coins</source>
<translation type="unfinished">Send Coins</translation>
</message>
<message>
- <location line="+245"/>
- <location line="+49"/>
- <location line="+20"/>
- <location line="+5"/>
<source>Fee bump error</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-74"/>
<source>Increasing transaction fee failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Do you want to increase the fee?</source>
<extracomment>Asks a user if they would like to manually increase the fee of a transaction that has already been created.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Current fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Increase:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>New fee:</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Warning: This may pay the additional fee by reducing change outputs or adding inputs, when necessary. It may add a new change output if one does not already exist. These changes may potentially leak privacy.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Confirm fee bump</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+17"/>
<source>Can't draft transaction.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>PSBT copied</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>Fee-bump PSBT copied to clipboard</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Can't sign transaction.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Could not commit transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Signer error</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Can't display address</source>
<translation type="unfinished"></translation>
</message>
@@ -5352,48 +4259,39 @@ Go to File > Open Wallet to load a wallet.
<context>
<name>WalletView</name>
<message>
- <location filename="../walletview.cpp" line="+50"/>
<source>&Export</source>
<translation type="unfinished">&Export</translation>
</message>
<message>
- <location line="+1"/>
<source>Export the data in the current tab to a file</source>
<translation type="unfinished">Export the data in the current tab to a file</translation>
</message>
<message>
- <location line="+163"/>
<source>Backup Wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Wallet Data</source>
<extracomment>Name of the wallet data file format.</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Backup Failed</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>There was an error trying to save the wallet data to %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Backup Successful</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+0"/>
<source>The wallet data was successfully saved to %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+37"/>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
@@ -5401,373 +4299,299 @@ Go to File > Open Wallet to load a wallet.
<context>
<name>bitcoin-core</name>
<message>
- <location filename="../bitcoinstrings.cpp" line="+208"/>
<source>The %s developers</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-196"/>
<source>%s failed to validate the -assumeutxo snapshot state. This indicates a hardware problem, or a bug in the software, or a bad software modification that allowed an invalid snapshot to be loaded. As a result of this, the node will shut down and stop using any state that was built on the snapshot, resetting the chain height from %d to %d. On the next restart, the node will resume syncing from %d without using any snapshot data. Please report this incident to %s, including how you obtained the snapshot. The invalid snapshot chainstate will be left on disk in case it is helpful in diagnosing the issue that caused this error.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>%s request to listen on port %u. This port is considered "bad" and thus it is unlikely that any peer will connect to it. See doc/p2p-bad-ports.md for details and a full list.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+24"/>
<source>Disk space for %s may not accommodate the block files. Approximately %u GB of data will be stored in this directory.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Distributed under the MIT software license, see the accompanying file %s or %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Error loading wallet. Wallet requires blocks to be downloaded, and software does not currently support loading wallets while blocks are being downloaded out of order when using assumeutxo snapshots. Wallet should be able to load successfully after node sync reaches height %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Error reading %s! Transaction data may be missing or incorrect. Rescanning wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Error starting/committing db txn for wallet transactions removal process</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>Error: Dumpfile format record is incorrect. Got "%s", expected "format".</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s".</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Error: Unable to produce descriptors for this legacy wallet. Make sure to provide the wallet's passphrase if it is encrypted.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+28"/>
<source>File %s already exists. If you are sure this is what you want, move it out of the way first.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+19"/>
<source>Invalid or corrupt peers.dat (%s). If you believe this is a bug, please report it to %s. As a workaround, you can move the file (%s) out of the way (rename, move, or delete) to have a new one created on the next start.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Invalid value detected for '-wallet' or '-nowallet'. '-wallet' requires a string value, while '-nowallet' accepts only '1' to disable all wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>More than one onion bind address is provided. Using %s for the automatically created Tor onion service.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>No dump file provided. To use dump, -dumpfile=<filename> must be provided.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Please contribute if you find %s useful. Visit %s for further information about the software.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+5"/>
<source>Prune configured below the minimum of %d MiB. Please use a higher number.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Prune mode is incompatible with -reindex-chainstate. Use full -reindex instead.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Rename of '%s' -> '%s' failed. You should resolve this by manually moving or deleting the invalid snapshot directory %s, otherwise you will encounter the same error again on the next startup.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+22"/>
<source>The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+8"/>
<source>The transaction amount is too small to send after the fee has been deducted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>This is a pre-release test build - use at your own risk - do not use for mining or merchant applications</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>This is the transaction fee you may discard if change is smaller than dust at this level</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>This is the transaction fee you may pay when fee estimates are not available.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Unsupported category-specific logging level %1$s=%2$s. Expected %1$s=<category>:<loglevel>. Valid categories: %3$s. Valid loglevels: %4$s.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Unsupported chainstate database format found. Please restart with -reindex-chainstate. This will rebuild the chainstate database.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Warning: Private keys detected in wallet {%s} with disabled private keys</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Witness data for blocks after height %d requires validation. Please restart with -reindex.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-255"/>
<source>%s is set very high!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>-maxmempool must be at least %d MB</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Cannot obtain a lock on directory %s. %s is probably already running.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Cannot resolve -%s address: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Cannot set -forcednsseed to true when setting -dnsseed to false.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Cannot set -peerblockfilters without -blockfilterindex.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-13"/>
<source>%s is set very high! Fees this large could be paid on a single transaction.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Cannot provide specific connections and have addrman find outgoing connections at the same time.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+27"/>
<source>Error loading %s: External signer wallet being loaded without external signer support compiled</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Error reading %s! All keys read correctly, but transaction data or address metadata may be missing or incorrect.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Error: Address book data in wallet cannot be identified to belong to migrated wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>Error: Duplicate descriptors created during migration. Your wallet may be corrupted.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>Error: Transaction %s in wallet cannot be identified to belong to migrated wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+22"/>
<source>Failed to remove snapshot chainstate dir (%s). Manually remove it before restarting.
</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to rename invalid peers.dat file. Please move or delete it and try again.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable %s.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Flushing block file to disk failed. This is likely the result of an I/O error.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Flushing undo file to disk failed. This is likely the result of an I/O error.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Incompatible options: -dnsseed=1 was explicitly specified, but -onlynet forbids connections to IPv4/IPv6</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+12"/>
<source>Invalid amount for %s=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+11"/>
<source>Maximum transaction weight is less than transaction weight without inputs</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Maximum transaction weight is too low, can not accommodate change output</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>Option '-checkpoints' is set but checkpoints were removed. This option has no effect.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Outbound connections restricted to CJDNS (-onlynet=cjdns) but -cjdnsreachable is not provided</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Outbound connections restricted to Tor (-onlynet=onion) but the proxy for reaching the Tor network is explicitly forbidden: -onion=0</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Outbound connections restricted to Tor (-onlynet=onion) but the proxy for reaching the Tor network is not provided: none of -proxy, -onion or -listenonion is given</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Outbound connections restricted to i2p (-onlynet=i2p) but -i2psam is not provided</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+10"/>
<source>Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of a pruned node)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Rename of '%s' -> '%s' failed. Cannot clean up the background chainstate leveldb directory.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+16"/>
<source>Specified -blockmaxweight (%d) exceeds consensus maximum block weight (%d)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Specified -blockreservedweight (%d) exceeds consensus maximum block weight (%d)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Specified -blockreservedweight (%d) is lower than minimum safety value of (%d)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+13"/>
<source>The combination of the pre-selected inputs and the wallet automatic inputs selection exceeds the transaction maximum weight. Please try sending a smaller amount or manually consolidating your wallet's UTXOs</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>The inputs size exceeds the maximum weight. Please try sending a smaller amount or manually consolidating your wallet's UTXOs</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>The preselected coins total amount does not cover the transaction target. Please allow other inputs to be automatically selected or include more coins manually</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+24"/>
<source>UTXO snapshot failed to validate. Restart to resume normal initial block download, or try loading a different snapshot.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+9"/>
<source>Unconfirmed UTXOs are available, but spending them creates a chain of transactions that will be rejected by the mempool</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Unexpected legacy entry in descriptor wallet found. Loading wallet %s
The wallet might have been tampered with or created with malicious intent.
@@ -5775,874 +4599,700 @@ The wallet might have been tampered with or created with malicious intent.
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+22"/>
<source>Your computer's date and time appear to be more than %d minutes out of sync with the network, this may lead to consensus failure. After you've confirmed your computer's clock, this message should no longer appear when you restart your node. Without a restart, it should stop showing automatically after you've connected to a sufficient number of new outbound peers, which may take some time. You can inspect the `timeoffset` field of the `getpeerinfo` and `getnetworkinfo` RPC methods to get more info.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>
Unable to cleanup failed migration</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>
Unable to restore backup of wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>default wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>whitebind may only be used for incoming connections ("out" was passed)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-256"/>
<source>A fatal internal error occurred, see debug.log for details: </source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Assumeutxo data not found for the given blockhash '%s'.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Block verification was interrupted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Can't spend unconfirmed version %d pre-selected input with a version 3 tx</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Can't spend unconfirmed version 3 pre-selected input with a version %d tx</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Cannot write to directory '%s'; check permissions.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Config setting for %s only applied on %s network when in [%s] section.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Copyright (C) %i-%i</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Corrupt block found indicating potential hardware failure.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Corrupted block database detected</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Could not find asmap file %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Could not generate scriptPubKeys (cache is empty)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Could not parse asmap file %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Could not read embedded asmap data</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Could not top up scriptPubKeys</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Disk space is too low!</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Done loading</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Dump file %s does not exist.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Elliptic curve cryptography sanity check failure. %s is shutting down.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Embedded asmap data not available</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error initializing block database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error loading %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error loading %s: Wallet corrupted</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error loading %s: Wallet requires newer version of %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error loading block database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error loading databases</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error opening block database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error opening coins database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Error reading configuration file: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error reading from database, shutting down.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error reading next record from wallet database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Error: Cannot extract destination from the generated scriptpubkey</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Error: Couldn't create cursor into database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Disk space is low for %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Dumpfile checksum does not match. Computed %s, expected %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+6"/>
<source>Error: Failed to create new watchonly wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Got key that was not hex: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Got value that was not hex: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Keypool ran out, please call keypoolrefill first</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Missing checksum</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: No %s addresses available.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Not all address book records were migrated</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Not all transaction records were migrated</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: This wallet already uses SQLite</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: This wallet is already a descriptor wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error: Unable to begin reading all records in the database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to make a backup of your wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to parse version %u as a uint32_t</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Error: Unable to read all records in the database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to read wallet's best block locator record</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to remove watchonly address book data</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to write data to disk for wallet %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to write record to new wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to write solvable wallet best block locator record</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Error: Unable to write watchonly wallet best block locator record</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Error: database transaction cannot be executed for wallet %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to acquire rescan reserver during wallet initialization</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Failed to close block undo file.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to close file when writing block.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to disconnect block.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to listen on any port. Use -listen=0 if you want this.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to read block.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Failed to rescan the wallet during initialization</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Failed to verify database</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to write block.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failed to write undo data.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Failure removing transaction: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Fee rate (%s) is lower than the minimum fee rate setting (%s)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Ignoring duplicate -wallet %s.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Incorrect or no genesis block found. Wrong datadir for network?</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Initialization sanity check failed. %s is shutting down.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Input not found or already spent</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Insufficient dbcache for block verification</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Insufficient funds</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Invalid -i2psam address or hostname: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Invalid -onion address or hostname: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Invalid -proxy address or hostname: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Invalid P2P permission: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Invalid amount for %s=<amount>: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="-118"/>
<source>A %zu MiB dbcache may be too large for a system memory of only %zu MiB.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+21"/>
<source>Creating wallet…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+7"/>
<source>Duplicate binding configuration for address %s. Please check your -bind, -bind=...=onion and -whitebind settings.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Error creating %s: Could not write version metadata.</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+89"/>
<source>Invalid amount for -%s=<amount>: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Invalid netmask specified in -whitelist: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Invalid port specified in %s: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Listening for incoming connections failed (listen returned error %s)</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Loading P2P addresses…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Loading banlist…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Loading block index…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Loading wallet…</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+3"/>
<source>Maximum transaction weight must be between %d and %d</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Missing amount</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>Missing solving data for estimating transaction size</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+2"/>
<source>Need to specify a port with -whitebind: '%s'</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+1"/>
<source>No addresses available</source>
<translation type="unfinished"></translation>
</message>
<message>
- <location line="+4"/>
<source>Not found pre-selected input %s</source>
<translation type="unfinished"></translation>
</message>
Risk score
Our methodology →Why this scored 15/100
Human-validated context
Community notes
Notes can correct, qualify, or add evidence to the AI analysis. Every note shown here has been validated by a human moderator.
No validated notes yet.
The AI analysis stands alone for now. Submit a note if you can add evidence or important context.